2022
Multiscale plasmonic refractory nanocomposites for high-temperature solar photothermal conversion.
Z. Huang, C. Cao, Q. Wang, H. Zhang, C. Owens, A.J. Hart, K. Cui.
Nano Letters, 22 (21):8526-8533, 2022. [pdf] [doi]
Purification of dense carbon nanotube networks by subcritical hydrothermal processing.
M.N. Durso, A.J. Hart.
Carbon Trends, 9:100206, 2022. [pdf] [doi]
In-situ monitoring of material extrusion processes via thermal videoimaging with application to Big Area Additive Manufacturing (BAAM).
F. Caltanissetta, G. Dreifus, A.J. Hart, B.M. Colosimo.
Additive Manufacturing, 58:102995, 2022. [pdf] [doi]
Interfacial chemical vapor deposition of wrinkle-free bilayer graphene on dielectric substrates.
K. Zhang, A.J. Hart.
Applied Surface Science, 58:102995, 2022. [pdf] [doi]
Physically contextualized machining instructions through augmented reality.
E. Higgason, G. Enns, J. Wight, E. Welsh, A.J. Hart, J. Liu.
American Society for Engineering Education Conference, 2022. [pdf]
Towards directed energy deposition of metals using polymer-based supports: hardness of 316L stainless steel deposited on carbon-fiber-reinforced ABS.
R. Kurfess, R. Kannan, T. Fedlhausen, K. Saleeby, A.J. Hart, D. Hardt.
2023 ASME 2022 17th International Manufacturing Science and Engineering Conference, MSEC2022-85562, 2022. [pdf] [doi]
Direct ink writing: a 3D printing technology for diverse materials.
M.A.S.R. Saadi, A. Maguire, N.T. Pottackal, M.S.H. Thakur, M.M. Ikram, A.J. Hart, P.M. Ajayan, M.M. Rahman.
Advanced Materials, 34(28):2108855, 2022. [pdf] [doi]
High-volume-fraction textured carbon nanotube–bis (maleimide) and epoxy matrix polymer nanocomposites: implications for high-performance structural composites.
A.L. Kaiser, C.A.C. Chazot, L.H. Acauan, I.V. Albelo, J. Lee, J.L. Gair Jr., A.J. Hart, I.Y. Stein, B.L. Wardle.
ACS Applied Nano Materials, 5(7):9008–9023 2022. [pdf] [doi]
Antifouling surface coatings from self‐assembled zwitterionic aramid amphiphile nanoribbons.
T. Christoff-Tempesta, E. Deiss-Yehiely, P.C. Dromel, L.D. Uliassi, C.A.C. Chazot, E. Postelnicu, A.J. Hart, M. Spector, P.T. Hammond, J.H. Ortony.
Advanced Materials Interfaces, 9(22):2200311, 2022. [pdf] [doi]
On Oreology, the fracture and flow of “milk’s favorite cookie”.
C.E. Owens, M. Fan, A.J. Hart, G.H. McKinley.
Physics of Fluids, 34(4):043107, 2022. [pdf] [doi] [design files]
Versatile acid solvents for pristine carbon nanotube assembly.
R.J. Headrick, S.M. Williams, C.E. Owens, L.W. Taylor, O.S. Dewey, C.J. Ginestra, L. Liberman, A. Mati, Y. Talmon, B. Maruyama, G.H. McKinley, A.J. Hart, M. Pasquali.
Science Advances, 8(17), 2022. [pdf] [doi] [videos]
Automated processing of environmental transmission electron microscopy images for quantification of thin film dewetting and carbon nanotube nucleation dynamics.
N.T. Dee, M. Schneider, D. Zakharov, P. Kidambi, A.J. Hart.
Carbon, 192:249-258 2022. [pdf] [doi]
A spiral laser scanning routine for powder bed fusion inspired by natural predator-prey behaviour.
S.I. Kim, A.J. Hart.
Virtual and Physical Prototyping, 17(2):239-255, 2022. [pdf] [doi]
Molecular alignment of a meta-aramid on carbon nanotubes by in situ interfacial polymerization.
C.A.C. Chazot, B. Damirichi, A.C.T. van Duin, A.J. Hart.
Nano Letters, 22(3):998-1006 2022. [pdf] [doi]
A testbed for investigation of laser powder bed fusion at elevated atmospheric pressure.
D.A. Griggs, J.S. Gibbs, S.P. Baker, R.W. Penny, M.C. Feldmann, A.J. Hart.
Additive Manufacturing, 51:102581, 2022. [pdf] [doi]
Printable, castable, nanocrystalline cellulose-epoxy composites exhibiting nacre-like toughening.
A. Rao, T. Divoux, C.E. Owens, A.J. Hart.
Cellulose, 29:2387–2398 2022. [pdf] [doi]
High-yield microplasma synthesis of monodisperse sub-3 nm diameter metal nanoparticles explained by a charge-mediated formation mechanism.
W.J. Sawyer, A.J. Hart.
Journal of Aerosol Science, 161:105915, 2022. [pdf] [doi]
Mechanized spreading of ceramic powder layers for additive manufacturing characterized by transmission x-ray imaging: Influence of powder feedstock and spreading parameters on powder layer density.
D. Oropeza, R.W. Penny, D. Gilbert, A.J. Hart.
Powder Technology, 398:117053, 2022. [pdf] [doi]
A rapid development workflow for binder inks for additive manufacturing with application to polymer and reactive binder ink formulation.
D. Oropeza, R. Roberts, A.J. Hart.
Journal of Materials Processing Technology, 73:471-482, 2022. [pdf] [doi]
2021
Reactive binder jet additive manufacturing for microstructural control and dimensional stability of ceramic materials.
D. Oropeza, A.J. Hart.
Additive Manufacturing, 48(Part B):102448, 2021. [pdf] [doi]
Pointwise fabrication and fluidic shaping of carbon nanotube field emitters.
C. E. Owens, J. Ludwick, J. Y. Ma, R. J. Headrick, S. M. Williams, M. Creighton, T. C. Back, B. Maruyama, M. Pasquali, G. H. McKinley, A.J. Hart.
21st International Conference on Solid State Sensors, Actuators, and Microsystems, 2021. [pdf] [doi]
Spatial mapping of powder layer density for metal additive manufacturing via X-ray microscopy.
R.W. Penny, P.M. Praegla, M. Ochsenius, D. Oropeza, C. Meier, W.A. Wall, A.J. Hart.
Additive Manufacturing, 46:102197, 2021. [pdf] [doi]
Physics-based modeling and predictive simulation of powder bed fusion additive manufacturing across length scales.
C. Meier, S. L. Fuchs, N. Much, J. Nitzler, R. W. Penny, P. M. Praegla, S. D. Pröll, Y. Sun, R. Weissbach, M. Schreter, N. E. Hodge, A. J. Hart, W. A. Wall.
GAMM-Mitteilungen, 44(3):e202100014, 2021. [pdf] [doi]
A laboratory-scale binder jet additive manufacturing testbed for process exploration and material development.
D. Oropeza, A.J. Hart.
International Journal of Advanced Manufacturing Technology, 114(11-12): 3459–3473, 2021. [pdf] [doi] [video]
Teaching manufacturing processes using a flipped classroom model.
A.J. Hart, D. Wendell, J. Liu, J. Lewandowski, M. Funes, A. Shih.
Procedia Manufacturing, 53:773-781, 2021. [pdf] [doi]
A novel smoothed particle hydrodynamics formulation for thermo-capillary phase change problems with focus on metal additive manufacturing melt pool modeling.
C. Meier, S.L. Fuchs, A.J. Hart, W.A. Wall.
Computer Methods in Applied Mechanics and Engineering, 381:113812, 2021. [pdf] [doi]
Iron oxide xerogels for improved water quality monitoring of arsenic(III) in resource-limited environments via solid-phase extraction, preservation, storage, transportation, and analysis of trace contaminants (SEPSTAT).
M.S. Bono, E.B. Hanhauser, C. Vaishnav, A.J. Hart, R. Karnik.
Analytical Methods, 18:2081-2176, 2021. [pdf] [doi]
Substrate-versatile direct-write printing of carbon nanotube-based flexible conductors, circuits, and sensors.
C.E. Owens, R.J. Headrick, S. Williams, A.J. Fike, M. Pasquali, G.H. McKinley, A.J. Hart.
Advanced Functional Materials, 31(25):2100245, 2021. [pdf] [doi] [videos]
Limiting mechanisms and scaling of electrostatically controlled adhesion of soft nanocomposite surfaces for robotic gripping.
M.S.H. Boutilier, C. Cao, N. Nayakanti, S. Kim, S.M. Taheri-Mousavi, A.J. Hart
ACS Applied Materials and Interfaces, 13(1):1192–1203, 2021. [pdf] [doi] [video]
A modular testbed for mechanized spreading of powder layers for additive manufacturing.
D. Oropeza, R. Roberts, A.J. Hart.
Review of Scientific Instruments, 92(1):015114, 2021. [pdf] [doi]
2020
Digital metal printing by electrohydrodynamic ejection and in-flight melting of microparticles.
Henry Merrow, Justin D. Beroz, Kaihao Zhang, Ulrich P. Muecke, A. John Hart.
Additive Manufacturing, 37:101703, 2020. [pdf] [doi]
High-speed production of crystalline semiconducting polymer line arrays by meniscus oscillation self-assembly.
J. Jeon, A. Tan, J. Lee, E.J. Park, S. Won, S. Kim, M. Bedewy, J. Go, J.K. Kim, A.J. Hart, J.J. Wie.
ACS Nano, 14(12):17254–17261, 2020. [pdf] [doi]
Simulating the AM production facility: a configurable tool for strategic factory-level planning.
E. Shakirov, K. Gee, H. Quinlan, C. Fortin, I. Uzhinsky, A.J. Hart.
ASME 15th International Manufacturing Science and Engineering Conference (MSEC), 2020. [pdf]
In situ interfacial polymerization: A technique for rapid formation of highly-loaded carbon nanotube-polymer composites.
C.A.C. Chazot, C.K. Jons, A.J. Hart.
Advanced Functional Materials, 30(52):2005499, 2020. [pdf] [doi]
A microneedle technology for sampling and sensing bacteria in the food supply chain.
D. Kim, Y. Cao, D. Mariappan, M.S. Bono, A.J. Hart, B. Marelli.
Advanced Functional Materials, 31(1):2005370, 2020. [pdf] [doi] [MIT News]
A precision desktop plate-to-roll apparatus for development of advanced flexographic printing processes.
D.D. Mariappan, S. Kim, A.J. Hart.
Precision Engineering, 66:392-400, 2020. [pdf] [doi]
Strong, ultralight nanofoams with extreme recovery and dissipation by manipulation of internal adhesive contacts.
Sei Jin Park, Jungho Shin, Daniel J. Magagnosc, Sanha Kim, Changhong Cao, Kevin T. Turner, Prashant K. Purohit, Daniel S. Gianola, and A. John Hart.
ACS Nano, 14(7):8383–8391, 2020. [pdf] [doi][video]
Maximization of carbon nanotube yield by solid carbon-assisted dewetting of iron catalyst films.
Rahul Rao, Jennifer Carpena-Núñez, Nicholas T. Dee, Dmitri N.Zakharov, J. Anibal Boscoboinik, Eric A. Stach, A. John Hart, Benji Maruyama.
Carbon, 165:251-258, 2020. [pdf] [doi]
Strong macroscale supercrystalline structures by direct-write self-assembly of ceramic nanoparticles.
B. Domènech, A.T.L. Tan, H. Jelitto, E.Z. Berodt, M. Blankenburg, O. Focke, J. Cho, C.C. Tasan, L.C. Ciacchi, M. Müller, K.P. Furlan, A.J. Hart, G.A. Schneider.
Advanced Engineering Materials, 22(7):2000352, 2020. [pdf] [doi]
Interfacial load monitoring and failure detection in total joint replacements via piezoresistive bone cement and electrical impedance tomography.
H. Ghaednia, C. E. Owens, R. Roberts, T. N. Tallman, A. J. Hart, K. M. Varadarajan.
Smart Materials and Structures, 29(8):085039, 2020. [pdf] [doi]
Improved rheometry of yield stress fluids using bespoke fractal 3D printed vanes.
C.E. Owens, A.J. Hart, G.H. McKinley.
Journal of Rheology, 64:643-662, 2020. [pdf] [doi]
Shape-programmed fabrication and actuation of magnetic nanocomposite micropost arrays.
J. Jeon, J.E. Park, S.J Park, S. Won, H. Zhao, S. Kim, B.S. Shim, A. Urbas, A.J. Hart, Z. Ku, J.J. Wie.
ACS Applied Materials and Interfaces, 12(14), 17113-17120, 2020. [pdf] [doi] [videos]
Solid-phase extraction, preservation, storage, transport and analysis of trace contaminants (SEPSTAT) for water quality monitoring of heavy metals.
E.B. Hanhauser, M.S. Bono, C. Vaishnav, A.J. Hart, R. Karnik.
Environmental Science and Technology, 54(5), 2646-2657, 2020. [pdf] [doi]
Fieldwork-based determination of design priorities for point-of-use drinking water quality sensors for use in resource-limited environments.
M.S. Bono, S. Beasley, E.B. Hanhauser, A.J. Hart, R. Karnik, C. Vaishnav.
PLoS ONE, 15(1):e0228140, 2020. [pdf] [doi]
2019
In-plane direct-write assembly of iridescent colloidal crystals.
A.T.L. Tan, S. Nagelberg, E. Chang-Davidson, J. Tan, J. K. W. Yang, M. Kolle, A.J. Hart.
Small, 16(4):1905519, 2019. [pdf] [doi]
High-density carbon nanotube forest growth on copper foil for enhanced thermal and electrochemical interfaces.
B. Lettiere, C. Chazot, K. Cui, A.J. Hart.
ACS Applied Nano Materials, 3(1), 77-83, 2019. [pdf] [doi]
Understanding and control of interactions between carbon nanotubes and polymers for manufacturing of high-performance composite materials.
C.A.C. Chazot, A.J. Hart
Composites Science and Technology. 183:107795, 2019. [pdf] [doi]
Delamination mechanics of carbon nanotube micropillars.
J. Brown, T. Hajilounezhad, N. Dee, S. Kim, A.J. Hart, M. Maschmann
ACS Applied Materials & Interfaces. 11(38), 35221-35227, 2019. [pdf] [doi]
Microstructured ceramic-coated carbon nanotube surfaces as high heat flux pool boiling interfaces.
H. Zhao, S. Dash, N.S. Dhillon, S. Kim, B. Lettiere, K. Varanasi, A.J. Hart
ACS Applied Nano Materials. 2(9), 538-5545, 2019. [pdf] [doi]
A robotic platform for flow synthesis of organic compounds informed by AI planning.
C.W. Coley, D.A. Thomas III, J.A.M. Lummiss, J.N. Jaworski, C.P. Breen, V. Schultz, T. Hart, J.S. Fishman, L. Rogers, H. Gao, R.W. Hicklin, P.P. Plehiers, J. Byington, J.S. Piotti, W.H. Green, A.J.Hart, T.F. Jamison, K.F. Jensen
Science. 365.6453: eaax1566, 2019. [pdf] [doi] [MIT News] [video]
Soft nanocomposite electroadhesives for digital micro- and nanotransfer printing.
S. Kim, Y. Jiang, K. Towell, M.S.H. Boutilier, N. Nayakanti, C. Chun, C. Jacob, H. Zhao, K.T. Turner, A.J. Hart.
Science Advances. 4(10): EAAX4790, 2019. [pdf] [doi] [MIT News]
Isolating the roles of hydrogen exposure and trace carbon contamination on the formation of active catalyst populations for carbon nanotube growth.
J. Carpena-Núñez, J.A. Boscoboinik, S.M. Saber, R. Rao, J. Zhong, M.R. Maschmann, P.R. Kidambi, N.T. Dee, D.N. Zakharov, D. Stacchiola, A.J. Hart, E.A. Stach, B. Maruyama.
ACS Nano. 13(8), 8736-8748, 2019. [pdf] [doi]
Carbon-assisted catalyst pre-treatment enables straightforward synthesis of high-density carbon nanotube forests.
N.T. Dee, J. Li, A.O. White, C. Jacob, W. Shi, P.R. Kidambi, K. Cui, D.N. Zakharov, N.Z. Jankovic, M. Bedewy, C.A. Chazot, J. Carpena-Nunez, B. Maruyama, E.A. Stach, D.L. Plata, A.J. Hart.
Carbon. 153:196-205, 2019. [pdf] [doi]
An assessment of the dimensional accuracy and geometry-resolution limit of desktop stereolithography using response surface methodology.
I. Cotabarren, C.A. Palla, C. McCue, A.J. Hart.
Rapid Prototyping Journal. 25(7), 1169-1186, 2019. [pdf] [doi]
Dynamics of liquid transfer from nanoporous stamps in high-resolution flexographic printing.
D.D. Mariappan, S. Kim, M.S.H. Boutilier, J. Zhao, H. Zhao, J. Beroz, U. Muecke, H. Sojoudi, K. Gleason, P. Brun, A.J. Hart.
Langmuir. 35(24):7659-7671, 2019. [pdf] [doi]
Precision assembly of additively manufactured components using integral kinematic couplings.
R.W. Penny, A.J. Hart.
Precision Engineering. 60:104-116, 2019. [pdf] [doi]
Shear melting and recovery of crosslinkable cellulose nanocrystal-polymer gels.
A. Rao, T. Divoux, G.H. McKinley, A.J. Hart.
Soft Matter. 15:4401-4412, 2019. [pdf] [doi]
Stability limit of electrified droplets.
J. Beroz, A.J. Hart, J.W.M. Bush.
Physical Review Letters. 122:244501, 2019. [pdf] [video][doi] [MIT News]
Additive manufacturing of biomechanically tailored meshes for compliant wearable and implantable devices.
S.W. Pattinson, M.E. Huber, S. Kim, J. Lee, S. Grunsfeld, R. Roberts, G. Dreifus, C. Meier, L. Liu, N. Hogan, A.J. Hart.
Advanced Functional Materials. 2019, 1901815. [pdf] [doi] [MIT News]
Hierarchically structured nanoparticle monolayers for the tailored etching of nanoporous silicon.
M. Sharma, A.T.L. Tan, B. Smith, A.J. Hart, J.C. Grossman.
ACS Applied Nano Materials. 2(3):1146-1151, 2019. [pdf] [doi]
Synthetic butterfly scale surfaces with compliance-tailored anisotropic drop adhesion.
H. Zhao, S.J. Park, B.R. Solomon, S. Kim, D. Soto, A.T. Paxson, K.K. Varanasi, A.J. Hart.
Advanced Materials. 31(14):1807686, 2019. [pdf] [doi]
Geometric tailoring of strength and toughness in self-locking interleaved laminates.
S. Tawfick, N. Nayakanti, C. Prohoda, A.J. Hart.
Extreme Mechanics Letters. 27:94-101, 2019. [pdf] [doi]
In situ mechanochemical modulation of carbon nanotube forest growth.
N.T. Dee, M. Bedewy, A. Rao, J. Beroz, B. Lee, E.R. Meshot, C.A. Chazot, P.R. Kidambi, H. Zhao, T. Serbowicz, K. Teichert, P.K. Purohit, A.J. Hart.
Chemistry of Materials. 31(2):407–418, 2019. [pdf] [doi]
Modeling and characterization of cohesion in fine metal powders with a focus on additive manufacturing process simulations.
C. Meier, R. Weissbach, J. Weinberg, W.A. Wall, A.J. Hart.
Powder Technology. 343:855-866, 2019. [pdf] [doi]
Critical influences of particle size and adhesion on powder layer uniformity in metal additive manufacturing.
C. Meier, R. Weissbach, J. Weinberg, W.A. Wall, A.J. Hart.
Journal of Materials Processing Technology. 266:484-501, 2019. [pdf] [doi]
2018
Carbon nanotubes and related nanomaterials: critical advances and challenges for synthesis towards mainstream commercial applications.
R. Rao, C. Pint, A. Islam, R. Weatherup, S. Hofmann, E. Meshot, F. Wu, C. Zhou, N.T. Dee, P. Amama, J. Carpena-Nuñez, W. Shi, D. Plata, E. Penev, B. Yakobson, P. Balbuena, C. Bichara, D. Futaba, S. Noda, H. Shin, K. Kim, B. Simard, F. Mirri, M. Pasquali, F. Fornasiero, E. Kauppinen, M. Arnold, B. Cola, P. Nikolaev, S. Arepalli, H. Cheng, D. Zakharov, E. Stach, J. Zhang, F. Wei, M. Terrones, D. Geohegan, B. Maruyama, S. Maruyama, Y. Li, W. Adams, A.J. Hart.
ACS Nano. 12(12), 11756-11784, 2018. [pdf] [doi]
In-field determination of soil ion content using a handheld device and screen-printed solid-state ion-selective electrodes.
R. Rosenberg, M.S. Bono, S. Braganza, C. Vaishnav, R. Karnik, A.J. Hart.
PLOS One. 13(9): e0203862, 2018. [pdf] [doi]
Direct-write freeform colloidal assembly.
A.T.L. Tan, J.D. Beroz, M. Kolle, A.J. Hart.
Advanced Materials. 30(44):1803620, 2018. [pdf] [doi] [MIT News]
Tungsten-carbon nanotube composite photonic crystals as thermally stable spectral-selective absorbers and emitters for thermophotovoltaics.
K. Cui, P. Lemaire, H. Zhao, T. Savas, G. Parsons, A.J. Hart.
Advanced Energy Materials. 8(27):1801471, 2018. [pdf] [doi]
3D printing metals like thermoplastics: Fused filament fabrication of metallic glasses.
M.A. Gibson, N.M. Mykulowycz, J. Shim, R. Fontana, P. Schmitt, A. Roberts, J. Ketkaew, L. Shao, W. Chen, P. Bordeenithikasem, J.S. Myerberg, R. Fulop, M.D. Verminski, E.M. Sachs, Y. Chiang, C.A. Schuh, A.J. Hart, J. Schroers.
Materials Today. 21(7):697-702, 2018. [pdf] [doi]
A one-step method of hydrogel modification by single-walled carbon nanotubes for highly stretchable and transparent electronics.
E. Gilshteyn, S. Lin, V. Kondrashov, D. Kopylova, A. Tsapenko, A. Anisimov, A.J. Hart, X. Zhao, A.G. Nasibulin.
ACS Applied Materials & Interfaces. 10(33):28069-28075, 2018. [pdf] [doi]
A scalable route to nanoporous large-area atomically-thin graphene membranes by roll-to-roll chemical vapor deposition and polymer support casting.
P.R. Kidambi, D.D. Mariappan, N.T. Dee, A. Vyatskikh, S. Zhang, R. Karnik, A.J. Hart.
ACS Applied Materials & Interfaces. 10(12):10369-10378, 2018. [pdf] [doi]
High-precision modular microfluidics by micromilling of interlocking injection-molded blocks.
C.E. Owens, A.J. Hart.
Lab on a Chip. 18:890-901, 2018. [pdf] [doi] [MIT News]
Modulation of the effective density and refractive index of carbon nanotube forests via nanoimprint lithography.
S.J. Park, J.G. Ok, H.J. Park, K. Lee, J.H. Lee, J.D. Kim, E. Cho, H.W. Baac, S. Kang, L.J. Guo, A.J. Hart.
Carbon. 129:8-14, 2018. [pdf] [doi]
Twist-coupled Kirigami cells and mechanisms.
N. Nayakanti, S. Tawfick, A.J. Hart.
Extreme Mechanics Letters. 21:17-24, 2018. [pdf] [doi]
Thermophysical phenomena in metal additive manufacturing by selective laser melting: fundamentals, modeling, simulation, and experimentation.
C. Meier, R. Penny, Y. Zou, J.S. Gibbs, A.J. Hart.
Annual Review of Heat Transfer. 20:241-316, 2018. [pdf] [doi]